-
Deadbolt door prep checklist (B60/B62)
Use this video to check that your door is properly prepared for a Schlage B60/B62 deadbolt.
1:22
-
Deadbolt installation guide (B60/B62)
Schlage’s B Series (B60/B62) Deadbolts add an extra layer of security to your home, and are incredibly simple to install. This video walks you through each step of installation to make the process even easier.
6:21
-
Hall & Closet / Bed & Bath lever: How to switch the handing (F10 / F40)
Installed your lever, but it doesn’t look quite right? The lever is probably upside down, which can be easily corrected by switching the handing. This video shows you how to make sure your levers always look perfect.
0:51
-
Hall & Closet / Bed & Bath lock door prep checklist (F10 / F40)
On a standard pre-drilled door, you’ll be done installing your passage lock in just minutes using only a tape measure and a Phillips screwdriver. Use this video to check that your door is properly prepared.
1:56
-
Hall & Closet / Bed & Bath lock installation guide (F10 / F40)
This video walks you through each step of installation for your passage lock to make the process even easier.
6:42
-
Handleset door prep checklist (F60/F62/F93)
Use this video to check that your door is properly prepared for a Schlage F60/F62/F93.
1:30
-
Handleset installation guide (F60/F62/F93)
Schlage’s F Series Handlesets are the perfect finishing touch for your exterior doors, and they are incredibly simple to install. This video walks you through each step of installation to make the process even easier.
7:06
-
How to Add and remove access codes for Schlage Sense™ (BE479)
In this video you will learn how to add and remove access codes for your Schlage Sense™ Smart Deadbolt.
2:57
-
How to install Schlage Control Smart Deadbolt (BE467)
This video describes how to install the Schlage BE467 Control Smart Deadbolt.
1:34
-
-
How to restore the Keypad Lever to original factory settings (FE575 / FE595)
See how to restore your Keypad Entry Auto-Lock (FE575) and the Keypad Entry Flex-Lock (FE595) to the original factory settings.
0:41
-
How to retrieve activity history for Schlage Sense™ (BE479)
In this video you will learn how to retrieve the activity history for your Schlage Sense™ Smart Deadbolt.
1:19
-
How to set up Auto-Lock for Schlage Sense™ (BE479)
In this video you will learn how to set up auto-lock for your Schlage Sense™ Smart Deadbolt.
1:13
-
How to: Keypad Deadbolt positioning (BE365)
This video will show you how to change the positioning of your Schlage electronic Keypad Deadbolt.
3:22
-
Installing Your Keypad Lever with Auto Lock (FE575)
See how to install your Keypad Entry Auto-Lock (FE575).
5:28